Hard Rock Water Well Drill Rod For Water Drill Truck Carbon Steel

Hard Rock Drill Rods made from high-quality carbon steel material for water well drilling applications.

Integral Steel Rod is designed for use with hand-held drill machines in underground mining and small hole drilling applications. Compatible with small power rock drills including air leg rock drills and hand held rock drills, these rods reduce impact energy expense while improving drilling speed and efficiency. Suitable for drilling bore holes with diameters ranging from 30mm to 41mm.

Integral Drill Steels feature a fixed length design with a shank at one end and a bit at the other, capable of drilling to depths equivalent to their effective length. The bit may include single chisel-shaped tungsten carbide inserts or three such inserts.

For deep hole drilling, these rods are designed to be used in series where each subsequent rod is longer than the previous one. This requires a production series where the bit diameter is reduced for each increase in rod length to prevent jamming in the hole.

Integral Drill Steels typically feature forged collars and fixed lengths with a shank at one end and a bit at the other. The hexagonal chuck section provides leverage for the rotation chuck bushing. These rods can drill to depths matching their effective length, with bits that may include single or multiple tungsten carbide inserts.

Holes are typically drilled in 0.4m increments to accommodate air-leg feed length. For deeper holes (up to 2.0m), rods are used in series with progressively longer lengths and slightly smaller head sizes to prevent jamming.

Plug hole Integral Drill Steel is widely used in quarry operations for small hole drilling. The integrated design of drilling rods and bits allows direct matching with rock drills without requiring shank adapters or coupling sleeves. This design minimizes energy waste and significantly improves drilling efficiency.