2500mm Water Well Drill Bits Cylindrical Barrel
drilling well drill bit
,drilling water well drill bits
,bullet teeth well drill bit
2500mm Water Well Drill Bits Cylindrical Barrel
Water Well Drill Bits Brief
This drill bit is the first choice for drilling complex formations, delivering perfect stability, good drainage, and fast penetration rates
| Bit Type | Bit OD (mm) | Thread Connection | Main Material | IADC / Cutter Spec | Applicable Formation |
|---|---|---|---|---|---|
| PDC Drag Bit | 76 mm | 2 3/8" API REG PIN | Steel body+PDC cutter 1313/1613 | 3/4 wings | Soft/medium: clay, sand, mudstone, soft limestone |
| PDC Drag Bit | 89 mm | 2 3/8" API REG PIN | Steel body+PDC 1613 | 3/4 wings | Soft/medium rock |
| PDC Drag Bit | 110 mm | 2 7/8" API REG PIN | Steel body+PDC 1616 | 4/5 wings | Medium sandstone, limestone |
| PDC Drag Bit | 133 mm | 2 7/8" API REG PIN | Steel/Matrix body+PDC1913 | 4/6 wings | Medium/hard abrasive strata |
| PDC Drag Bit | 152 mm | 3 1/2" API REG PIN | Matrix body+PDC1916 | 5/6 wings | Medium/hard rock |
| Tricone Bit | 118 mm (4 5/8") | 2 7/8" API REG PIN | Alloy steel + TCI insert | IADC 217/317 | Medium/hard sandstone, shale |
| Tricone Bit | 133 mm | 2 7/8" API REG PIN | Alloy steel + TCI insert | IADC 437/517 | Hard limestone, dolomite |
| Tricone Bit | 152 mm | 3 1/2" API REG PIN | Alloy steel + TCI insert | IADC 517/537 | Hard granite interbeds |
| Tricone Bit | 171 mm | 3 1/2" API REG PIN | Alloy steel + TCI insert | IADC 537/617 | Very hard mixed formation |
| DTH Button Bit | 90 mm | DHD340 / BR3 shank | 42CrMo+Tungsten carbide button | 3 inch hammer bit | Hard granite, basalt, quartzite |
| DTH Button Bit | 110 mm | DHD340 / QL40 shank | 42CrMo+carbide button | 4 inch hammer bit | Hard rock |
| DTH Button Bit | 130 mm | DHD350 / QL50 shank | 42CrMo+carbide button | 5 inch hammer bit | High/hard rock |
| DTH Button Bit | 152 mm | DHD360 / QL60 shank | 42CrMo+carbide button | 6 inch hammer bit | Extra/hard bedrock |
Features:
1 Cylindrical barrel & conical barrel (depends on customer demand)
2 Throughout ventilation hole
3 Hard facing strips around shell for wear protection an service life extending
4 Kelly box size as per customer demand
1) Clay Drilling Buckets
There are two categories of clay drilling buckets:
1-Single Cut Clay Bucket 2- Double Cut Clay Bucket
Drilling Diameter Range: 600~2500mm Shell Length: 800~1200mm
Main Applications:
1 These buckets are suitable for drilling in clay, silt and loose to medium dense sand and gravel
2 Single cut buckets are recommended up to coarse gravel.
3 Double cut buckets are mainly used for bigger diameter uncased boreholes.
4 Single bottom buckets are used for clay laer and sticky formation.
2) Rock Drilling Buckets
There are two categories of rock drilling buckets:
1- Single Cut Rock Bucket 2- Double Cut Rock Bucket
Drilling Diameter Range: 600~2500mm Shell Length: 800~1200mm
Main Applications:
1 Rock buckets are suitable for drilling in medium to weak rock and in very dense sand and gravel.
2 Single cut buckets are recommended up to coarse gravel
3 Double cut buckets are recommended for secant piles and uncased boreholes construction.
| Single-Cut | Double-Cut | ||||
| Drilling Dia.(mm) | Shell Dia.(mm) | Shell Length (mm) | Shell Thickness(mm) | Weight(kg) | Weight(kg) |
| 600 | 550 | 1200 | 16 | 686 | 656 |
| 700 | 650 | 1200 | 16 | 824 | 784 |
| 800 | 700 | 1200 | 16 | 959 | 909 |
| 900 | 800 | 1200 | 16 | 1120 | 1051 |
| 1000 | 900 | 1200 | 16 | 1276 | 1186 |
| 1100 | 1000 | 1200 | 16 | 1416 | 1336 |
| 1200 | 1100 | 1200 | 16 | 1585 | 1455 |
| 1300 | 1200 | 1200 | 16 | 1828 | 1668 |
| 1400 | 1300 | 1200 | 16 | 2022 | 1841 |
| 1500 | 1400 | 1200 | 16 | 2078 | 1938 |
| 1600 | 1500 | 1200 | 16 | 2392 | 2152 |
| 1700 | 1600 | 1000 | 20 | 2401 | 2271 |
| 1800 | 1700 | 1000 | 20 | 3073 | 2823 |
| 2000 | 1900 | 800 | 20 | 3480 | 3160 |
| 2200 | 2100 | 800 | 20 | 4019 | 3669 |
| 2500 | 2400 | 800 |
3) Cleaning Bucket
Cleaning Diameter Range: 600~2500mm Barrel Length: 800~1500mm
Main Applications: Cleaning bucket is used for cleaning the bottom of borehole.
4) Core Barrels
Core barrels are generally divided into two types:
1 Core Barrel with Bullet Bits (Applicable for strong rock up to 100MPa or Rock with deep cracks)
2 Core Barrel with Roller Bits (Applicable for very strong rock formations with compressive strength grater than 100MPa)
Cutting Diameter Range: 600~2500mm
Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products:
Pneumatic Drilling Rig / Air Drilling Rig(ST-180,ST-200,ST-260,ST-300,ST-350,ST-400,ST450,ST-450,ST-500, ST-600,ST-800 and other Pneumatic water well drilling Rigs.), Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig(ST-30,ST-50,XY-1A, XY-1B, XY-2, XY-2B,GK180, GK200, GY150, GY200 and 30 impact drill rig, ZLJ series tunnel drilling rig and other geological drilling machines)Crawler Track Undercarriage, Drilling Mud Pump(BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps), Drilling Air Compressor, Water Well Drill Bits(PDC Drill Bit, Tricone Bit, DTH Button Bit), Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter
-
Vertical Diamond Core Drill Rig 100 Meters For Geological
XY-1 Vertical Diamond Core Drill Rig offers 100-150m drilling depth with hydraulic feeding and multi-speed rotation. Features diesel-electric dual power, lightweight portable design (540-600kg), and advanced hydraulic control for geological exploration and water well drilling. -
Blasting Holes Hydraulic Borehole Drilling Machine With Electric Motor/Diesel engine
Blasting Holes Hydraulic Borehole Drilling Machine with 150m depth, 11kw power, and diesel engine. Features dual-circuit hydraulic system for precise drilling, oversized cooling system, and corrosion-resistant components. Split-frame construction for easy transport and multi-gear spindle for varied rock layers. -
Integral Water Well Drill Pipe for Small Hole Drilling in Mining Machines
Integral water well drill pipe for mining machines with 76mm-140mm diameter, 1000-6000mm length. Features API 2 3/8 REG thread, DTH material, long service life and high wear resistance. Ideal for coal mining and rock drilling applications.