High Pressure Triplex Mud Pump 7.5-45kw Piston Grouting BW150

BW 150 Mud Pump Cement Injection For Drilling Water Borehole And Exploration
 
BW 150 Mud Pump Product Description

 
BW 150 Mud Pump Product Specifications
 

 
BW 150 Mud Pump Main Features
 
1. There are five dust-proof sealing rings on the pull rod to prevent the mud at the hydraulic end from entering the power end and the lubricating oil filter at the power end. It has been proved by many production tests that the seal is reliable and the performance is good. So that the service life of the gear is prolonged.
2. The inlet and outlet valves are made of steel balls. The valve cover is equipped with sound reducing rubber pad to reduce the impact noise.
3. The pressure gauge adopts BY-1 seismic pressure gauge with long service life.
4. Compact structure and beautiful appearance.
5. Good detachability, easy to repair and move.
 
BW 150 Mud Pump Applications
 
1.BW mud pump is widely used for grouting and mud jacking in engineering construction.

2.BW mud pump have four gear shifts.Output and drilling depth are adjustable,so it can be used to grout
cement slurry or equipped with drilling machine.
3.BW mud pump is widely used in railway, hydraulic engineering, metallurgical engineering, building

construction, geological exploration, engineering exploration.
 
BW Series Mud Pump Working Attentions
 
1. Before starting, the suction pipe, bottom valve and pump body should be filled with water, and the upper end of the pressure gauge buffer should be filled with oil.
2. Before starting, make the piston reciprocate twice, and start with no load when there is no obstruction. After starting, the load shall be increased gradually after the operation is normal.
3. During operation, the sand content of mud should be tested frequently. The sand content of mud shall not exceed 10%.
6. For mud pump with multiple speeds, several speeds shall be operated separately in each shift, and the operation time shall not be less than 30min
4. Do not change speed during operation; When it is necessary to change speed, stop the pump for shifting.
5. During operation, when there is abnormal noise, abnormal water volume and pressure, or obvious temperature rise, the pump shall be stopped for inspection.
6. Under normal conditions, the pump shall be stopped at no load. When the pump is stopped for a long time, all drain holes should be opened, the cylinder head should be loosened, the bottom valve drain rod should be lifted, and all the mud and sand in the pump body and pipeline should be drained.
7. In case of long-term shutdown, clean the mud and oil dirt of each part, drain the lubricating oil in the crankcase, and take anti-rust and anti-corrosion measures.
 




 

Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products:

Pneumatic Drilling Rig / Air Drilling Rig(ST-180,ST-200,ST-260,ST-300,ST-350,ST-400,ST450,ST-450,ST-500, ST-600,ST-800 and other Pneumatic water well drilling Rigs.), Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig(ST-30,ST-50,XY-1A, XY-1B, XY-2, XY-2B,GK180, GK200, GY150, GY200 and 30 impact drill rig, ZLJ series tunnel drilling rig and other geological drilling machines)Crawler Track Undercarriage, Drilling Mud Pump(BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps), Drilling Air Compressor, Water Well Drill Bits(PDC Drill Bit, Tricone Bit, DTH Button Bit), Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter