Impactor Borewell Drilling Rig Pneumatic Drilling Equipment 200m Depth For Borehole Blasting

High quality, competitive price pneumatic drilling rig with 200m drilling depth, crawler assembly, and powerful performance. Designed for various terrains with stable operation and flexible volume. Driven by hydraulic motor with large traction. Available in various models with support for customization. Especially suitable for water intake in mountainous and rocky strata.

• Small profile for easy access to narrow job sites
• Simple but reliable design with adequate rotary torque and lifting force for civilian market applications
• Hoist and winch able to lift drill tools and accessories up to 1,500kg, significantly reducing operator workload
• Rotation with two speed adjustable for different hole ranges and rock conditions

• Before sales: Engineering Consultance Service & Technical Support
• After sales: Process clients' feedback and problems during machine operation within 24 hours
• OEM service: Accept OEM orders with 70% of clients enjoying OEM services

1. The length, quantity, and foundation type of various machine logs should be determined based on equipment type, drilling design angle, depth, and regional conditions
2. Regardless of using wooden bases, channel steel, or I-beam machines, layout requirements are stable, square, and horizontal. Cross connecting bolts should be equipped with washers and tightened with nuts to increase foundation bearing capacity and equipment stability
3. In deep pit construction, if foundation rock layer is not firm, concrete foundation should be poured into the four legs of the drilling tower, drilling rig, power machine, and lower excavation pit
4. The installation sequence of drilling equipment is the drilling rig (intermediate shaft), power machine, mud pump, and other auxiliary equipment
5. The bolts of the drilling rig and power machine base are integrated with the intersection of the machine bed wood and machine sleepers
6. Install the drilling rig so that the center of the crown block (or leading edge), the center of the vertical shaft (or center of the rotary table), and the center of the drilling hole are in a straight line
7. When installing the intermediate shaft, power machine, and mud pump, if belt transmission is used, the distance between each part should be appropriate, and the belt pulley should be aligned
8. The installation of bolts for various equipment and auxiliary equipment must be equipped with washers and tightened
9. After installation completion, the team must organize relevant personnel for inspection and acceptance. Only after installation quality and safety protection devices meet requirements can drilling be started